Binatone HD-1802 Manuel d'utilisateur télécharger pdf (Page 33)

yellobrik

OBD 1510 E

Ethernet to Fiber Bidirectional Transceivers (switch)

 Bidirectional send and receive over single ﬁber link

 Supports standard Ethernet inputs up to 1Gbit

 Closed loop WDM ﬁber system

 Auto (10/100/1000) electrical port speed detection

 Manually force 10Mbit electrical speed

 Fiber connection speed always 1Gbit

 Auto or manual electrical crossover selection

 Distances up to 10km (6.2 miles) over SMF ﬁber

 Supplied as matched pair (A and B version)

The OBD 1510 E is a matched pair of compact Ethernet switches

designed to extend the reach of electrical Ethernet signals

over long distances. The two switches are linked via single

bidirectional ﬁber link which operates at a constant 1Ggit speed.

This pair of modules uses WDM ﬁber technology in a closed loop

arrangement and essentially functions as an Ethernet extender

solution. The ﬁber link supports distances up to 10Km and

provides a single, high speed 1Gbit error-free optical connection

between the two locations.

Each OBD 1510 E module has two standard RJ45 electrical

Ethernet ports and the complete system functions as a 4 port

Ethernet switch, providing two standard RJ45 Ethernet ports

at each location bridged with ﬁber. For legacy systems, each

electrical Ethernet port can be set for automatic speed detection

(10/100/1000) or forced to 10Mbit. Each port uses auto crossover

detection or can be forced manually if needed. These functions

are available using the dip switch.

Technical Speciﬁcations

Ethernet

2 x Ethernet ports, RJ45 Connectors.

10 BaseT UTP category 3,4 or 5 cable up to 328ft/100m (2 pairs)

100 BaseT XUTP category 5 cable up to 328ft/100m (2 pairs)

1000 BaseT XUTP category 5 cable up to 328ft/100m (4 pairs)

Auto detect bit rate (10/100/1000), or force to 10Mbit for

each port (selectable)

Automatic crossover detection or force manually for

each port (selectable)

Port speed / activity LED indication (next to Ethernet port)

Fiber Optic

1 x ﬁber optic I/O port (bidirectional)

Simplex (single mode) using LC/PC connection

WDM using 1310nm and 1550nm wavelengths

Optical budget = 18dB

Fiber TX active and RX active LEDs on side of module

Max. distance 10km (6.2 miles - Singlemode)

Power

+12VDC power supply (included)

Supports external power input from 9 - 14 VDC

Power LED on side of module

Size

105mm x 40mm x 22mm (4.13” x 1.57” x 0.86”)

Model #

OBD 1510 E

Includes

2 x OBD 1510 E modules (Type A and Type B), 2 x 12V DC

power supplies, transport case

Power Adapter Options

The kit INCLUDES AC power supplies. The power adapters below are optional.

P-TAP 1000

Use with a standard

battery P-TAP power

source.

XLR 1000

Use with a standard

4 pin XLR camera

battery power source

Fiber Adapter Options

Model # LC/SC SIM

LC/PC to SC/PC Adapter

Model # LC/ST SIM

LC/PC to ST/PC Adapter

These adapters allows the use of ST or SC ﬁber connections on the

module. SMF 0.5m (19.6”) tail introduces less than 0.25dB attenuation.

Fiber Optic Connection

LC/PC Simplex (single mode) (not included)

Speciﬁcations subject to change

LYNXTechnik AG | Broadcast Television Equipment

www.lynx-technik.com

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Binatone HD-1802 Manuel d'utilisateur Page 33

Commentaires sur ces manuels

Produits connexes et manuels pour Sèche-cheveux Binatone HD-1802