Binatone BS-8022 Manuel d'utilisateur télécharger pdf (Page 6)

Note: if you stand on the platform (1) before «0.0»

appeared on LCD (2), the scales will show no

reading. In this case, stand back from the scales and

repeat Step 2.

3. Evenly distributing your weight over the platform (1), stand onto

the scales and don’t move. Wait a few seconds until the appli-

ance calculates the result, which will appear on the display.

4. When measurements are completed, get off the tray.

Note: if after adjustment to zero on the display of the

scales (2) you did not put any load on the tray (1),

the scales will turn off automatically within

approximately six seconds.

5. If the measured weight exceeds the allowable load (150 kg), the

display will show the indication of excess load «Err».

6. If «LO» appears on the scales display (2), this means the batter-

ies require replacement. Open the cover of the compartment (3)

and carefully take them out. Put the new batteries in the appli-

ance, observing polarity.

CARE AND CLEANING

1. Wipe the appliance with a damp lint free cloth,

wiping it dry, so that there are no water marks

on the tray (1). Do prevent water getting in-

side the appliance. Do not use hard abrasive

materials and substances for cleaning.

2. Always keep the appliance in a horizontal

position in a dry, cool place. Do not store the

appliance in places with high humidity or temperature.

DISPOSAL

This appliance should be disposed of in accor-

dance with waste disposal regulations in your coun-

try and with the least damage to the environment.

Only ecologically safe materials are used in the

packaging of our products and the cardboard and

paper can be disposed of with normal paper waste.

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Pas de commentaire

Binatone BS-8022 Manuel d'utilisateur Page 6