Binatone NT-7702 Manuel d'utilisateur télécharger pdf (Page 6)

TOASTER COMPONENTS

DESCRIPTION

Figure A:

1. Case

2. Toast slots

3. Toast browning control handle

4. Loading lever

5. Level for installation of bun heating attachment

6. Bun heating attachment

7. Toast warm-up button

8. Toast ejection button

9. Frozen bread toasting button

10.Removable crumb tray

11.Power cord winding place

BEFORE THE FIRST USE

Before the first use run your toaster once

without putting bread inside to eliminate the for-

eign smells and dust that may accumulate on

the heating elements.

OPERATING MANUAL

1. Place your toaster upon a dry, smooth flat

level surface.

2. Plug into a wall outlet with the same voltage

as marked on the toaster case.

3. Set the toast browning control (3) to the

position you need. The control (3) may be

set into any one of seven possible positions —

1 to 7 (1 — light browning, 7 — maximum

browning).

Note: dry thin slices will be ready much faster than wet

thick ones.

4. Place one or two slices of bread into the slots (2) and pull the

lever (4) down as far as it will go to switch your toaster on.

Warning: when removing the toast, be careful not to burn

yourself on the very hot metallic slot (2) external

frames.

5. If you need to interrupt the toasting process press the ejection

button (8) — the toaster will switch off and the loading lever

(4) will go up.

6. If the toaster has switched off, but the toast is not ready, adjust

the browning control using the control handle (3), then pull

down the lever (4) once again. Watch carefully in order not to

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Pas de commentaire

Binatone NT-7702 Manuel d'utilisateur Page 6